Call us today! +1 740.548.0965


CIM Series Chassis Interface Module

InPower’s CIM Series Chassis Interface Modules provide a low cost and easy to install Park detection and transmission lock. These control functions are frequently required to ensure the vehicle is stationary and locked before operating equipment such as a lift, boom or outrigger.  While equipment is in operation, the CIM locks the vehicle in Park to prevent vehicle movement. A plug and play harness is supplied with the CIM.

Ford Chassis Interface Modules ( CIM1, CIM1-F, CIM1-R )

Key Features:

  • Supports Ford and Dodge Chassis
  • Output Indicates the Vehicle is in Park
  • Input Locks the Transmission in Park
  • Simple Plug and Play Installation
  • Small Size for Under Dash Location

The Park output is activated (+12 volts @ 2 amps) when the ignition switch is On AND the transmission is in Park. The Lock- input will lock the transmission in Park when a ground is applied. The Lock+ input will lock the transmission in Park when +12 volts is applied.


Operating Voltage Range:                 +9.5 to 18.5 Volts

Control Terminals:                              0.25 inch male Faston blade terminal

Connector:                                           Amp/Tyco Mate-N-Lock

Lock Shifter Input Voltage:

Lock –                                          Ground to activate

Lock +                                          >+1 Vdc to activate

Park Output:                                      +12 Vdc @ 2 Amps

Weight:                                                0.17 lbs

Dimensions:                                       1.55 x 3.00 x 0.75 inches

System Diagram:

Mechanical Drawing:

Product Literature and Resources:

CIM Data Sheet

CIM Owners Manual

Related Products