Ground-Output Reflex Module
InPower’s ReFlex Ground Output Truecontrol module brings a new level of flexibility and customization to vehicle load control. No more bulky, confusing relay banks with this module. Fully programmable, the RXG-0302 gives you three inputs and two outputs to control anything you need.
Logic/Counter/Delay Functions are available so that when the result is of programmed functions are TRUE, the corresponding output will sink current.
The unit is housed in a sturdy anodized aluminum case and furnished with a single eight pin connector. The connector has two output pins, one ground pin, one +12V power input pin, one programming pin and three system input pins.
The inputs can be defined as pull up or pull down True to accommodate 12V or Ground true logic.
The sink current for each of the RXG-0302 Outputs are limited to 1 Amp.
The programming pin allows the program to be replaced or adjusted as necessary to ensure it always meets your needs.
Vehicle Control Module ( RXG-0302-05-01SF )
- Three Voltage Inputs, Two Ground (True) outputs (current sinking)
- Programmable combinatorial logic and delays available
- Compact Size
- Eliminates the need for bulky relay banks
- Custom programs available
Power Input: +12V (should be a fused battery source)
Signal Inputs: Definable as responsive either to ground or +12V
GND Output capacity: Each output can sink 1 Amp
Dimensions: 2.25 x 1.75 x 1.25 inches
Operating Temp: -40ºC to +85ºC