VCMS2-PM1-CTRL1

VCMS2 Master Power Distribution Module

The VCMS2-PM1 CTRL1 is an eight output, eight input control module used as a stand-alone power distribution module. Molex 8-pin connector supplies the system ground and the Molex 20-pin connector provides access to the eight inputs, eight outputs and four power inputs. Each of the 8 outputs are rated at 15 amps each with over-current protection. Each PM1 is rated for a maximum of 60 amps and inputs can be programmed to respond to +12V or ground signals.

SKU: VCMS2-PM1-CTRL1 Categories: Emergency Vehicles, Shuttle Buses, Specialty Vehicles, VCMS II System, VCMS2 Components Tags: Compact Controller, Controller, Multiplex, Multiplex System, Smart Controller

Talk to a rep

VCMS2 Stand Alone Power Module ( VCMS2-PM1-CTRL1 )

Key Features:

Custom programming to provide for output to latch, flash, time on, time off, etc.
Eight digital inputs provided
All outputs over-current protected
Compact size with “L” bracket for mounting
60 amp maximum rating per module

Specifications:

Dimensions: 1.765″” H X 3.865″” L X 1.065″” D
Case: Anodized aluminum
Mounting: (2) #6-32 Screws through holes in “”L”” bracket to flat surface
Connectors: 20-Pin Molex for 8 inputs; 8 outputs and 4 power inputs; 8-Pin Molex for system ground
Outputs: (8) 12Vdc rated at 15 amps; module maximum current is 60 amps total
Inputs: (8) programmable to pull up for ground true or pull down for +12V true activation

System Diagram: