CIM Series Chassis Interface Module
InPower’s CIM Series Chassis Interface Modules provide a low cost and easy to install Park detection and transmission lock. These control functions are frequently required to ensure the vehicle is stationary and locked before operating equipment such as a lift, boom or outrigger. While equipment is in operation, the CIM locks the vehicle in Park to prevent vehicle movement. A plug and play harness is supplied with the CIM.
Ford Chassis Interface Modules ( CIM1, CIM1-F, CIM1-R )
Key Features:
- Supports Ford and Dodge Chassis
- Output Indicates the Vehicle is in Park
- Input Locks the Transmission in Park
- Simple Plug and Play Installation
- Small Size for Under Dash Location
The Park output is activated (+12 volts @ 2 amps) when the ignition switch is On AND the transmission is in Park. The Lock- input will lock the transmission in Park when a ground is applied. The Lock+ input will lock the transmission in Park when +12 volts is applied.
Specifications:
Operating Voltage Range: +9.5 to 18.5 Volts
Control Terminals: 0.25 inch male Faston blade terminal
Connector: Amp/Tyco Mate-N-Lock
Lock Shifter Input Voltage:
Lock – Ground to activate
Lock + >+1 Vdc to activate
Park Output: +12 Vdc @ 2 Amps
Weight: 0.17 lbs
Dimensions: 1.55 x 3.00 x 0.75 inches
System Diagram:
Mechanical Drawing:
Related Products
200 Amp Solid State Smart Battery Isolator
Learn More
Wheelchair Lift Safety Interlock
Learn More
Start / Stop, Ford Transit, 2026+
Learn More
200 Amp Dual Lug Solid State Smart Battery Isolator
Learn More