CIM Series Chassis Interface Module
InPower’s CIM Series Chassis Interface Modules provide a low cost and easy to install Park detection and transmission lock. These control functions are frequently required to ensure the vehicle is stationary and locked before operating equipment such as a lift, boom or outrigger. While equipment is in operation, the CIM locks the vehicle in Park to prevent vehicle movement. A plug and play harness is supplied with the CIM.
Ford Chassis Interface Modules ( CIM1, CIM1-F, CIM1-R )
Key Features:
- Supports Ford and Dodge Chassis
- Output Indicates the Vehicle is in Park
- Input Locks the Transmission in Park
- Simple Plug and Play Installation
- Small Size for Under Dash Location
The Park output is activated (+12 volts @ 2 amps) when the ignition switch is On AND the transmission is in Park. The Lock- input will lock the transmission in Park when a ground is applied. The Lock+ input will lock the transmission in Park when +12 volts is applied.
Specifications:
Operating Voltage Range: +9.5 to 18.5 Volts
Control Terminals: 0.25 inch male Faston blade terminal
Connector: Amp/Tyco Mate-N-Lock
Lock Shifter Input Voltage:
Lock – Ground to activate
Lock + >+1 Vdc to activate
Park Output: +12 Vdc @ 2 Amps
Weight: 0.17 lbs
Dimensions: 1.55 x 3.00 x 0.75 inches
System Diagram:
Mechanical Drawing:
Related Products
200 Amp Solid State Smart Battery Isolator
Learn More
200 Amp Dual Lug Solid State Smart Battery Isolator
Learn More
300 Amp Solid State Smart Battery Isolator
Learn More
Auxiliary Battery Switches
Learn More